Gehl DL7-44 Telehandler Forklift

Performance

Gehl DL7-44 DL Series Telescopic Handler Performance

The DL7-44 Telescopic Handler will help you find new ways to increase jobsite productivity, develop new business and provide a quick return-on-investment.

  • Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
  • 10-degree frame tilt in both directions.
  • Double universal joints for tight turn radius without applying stress on the axle.
  • Two-wheel, four-wheel, crab steering standard.
  • Standard centrifugal pre-cleaner and two-stage air cleaner.
  • Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
  • Transmission de-clutch system for faster boom cycle times.
  • Standard pneumatic tires; no ballast required.
  • ROPS and FOPS certified operator’s compartment.
Power (kW) 115 hp (86)
Maximum Travel Speed (km/hr) 22 mph (35.4)
Turning Radius (m) 12’2″ (3.7)
Lift Capacity (kg) 7,000 lbs. (3176)
Total Hydraulic System Capacity (L/min) 43 gpm (162.8)

Operator’s Cabin

Comfort comes standard on the DL7-44 Telescopic Handler, boasting 57 cubic feet of interior space.

  • Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads
    • Dual-Function – fully proportional control for all functions.
    • Tri-Function – operator pre-set auxiliary hydraulic flow rate for optimum attachment performance; trigger control overrides pre-set for full flow and faster cycle times.
  • Lockable, two-piece cab door for security, communication and cross-ventilation.
  • Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
  • Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
  • Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
Gehl DL7-44 Telescopic Handler Operator Station Controls

Handling

Safety and efficiency are two of the most important factors on the jobsite. The DL7-44 Telescopic Handler provides the tools to achieve both effectively.

  • Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
  • SAHR (spring-applied, hydraulic-release) parking brake is applied automatically when the engine is shut off, or by pressing a rocker switch.
Turning Radius (m) 12’2″ (3.7)

Remote Boom Control

The Remote Boom Control option allows operators to control boom and engine functions from outside the cab.

  • Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
  • Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.
Gehl DL Series Remote Boom Control Telehandler

Engine

Gehl DL7-44 Engine Access

The DL7-44 Telescopic Handlers provides the power to get work done effectively and efficiently.

  • Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
Manufacturer John Deere
Model 4045T Interim Tier IV
Power (kW) 115 hp (86)
Maximum Travel Speed (km/hr) 22 mph (35.4)

Hydraulics

The DL7-44 Telescopic Handler makes no exceptions when it comes to hydraulic performance. These machines can take virtually anything.

Pump Type Open-Center, Dual-Section
Total Capacity (L/min) 43 gpm (162.8)
Main Relief Pressure (bar) 3,000 psi (207)
Auxiliary Relief Pressure (bar) 2,500 psi (172)
Hydraulic Reservoir Capacity (L) 45 gal. (170)
Gehl DL7-44 Hydraulics

Attachments

There is a tool for every job, and the DL7-44 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

A Carriages – Masonry, framing and standard carriages available in different widths.
B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C Fork Shift – 50″ (1270 mm) wide.
E Swing Carriage – 90° and 180° swing.
F Log and Pipe Grapple.
G Jib Boom – 5′ (1.5 m) with winch and 60′ (18.3 m) cable.
H Truss Boom – 15′ (4.5 m) with optional winch.

Serviceability

Side-mounted engine improves serviceability, allowing three-sided service access through a large, hinged hood.

  • Exterior boom hose routings for easy access.
  • Transmission and hydraulics easily accessed through large hinged panel.
  • Easy access to hydraulic oil and transmission reservoirs.
  • Hydraulic main control valve in back door.
  • Rifled bushings in key areas
Gehl DL7-44 DL Series Service Access